 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TESS5400 INLINE Vishay Telefunken Silicon Photodetector with Logic Output Description TESS5400 INLINE is a high sensitive Photo Schmitt Trigger in a sideview plastic package with spherical lens. Its epoxy casting is designed as an infrared filter spectrally matched to GaAs IR emitters (lp=950nm). Features D D D D D D D D D D Very high photo sensitivity IR filter matched to GaAs Supply voltage range 4.5 to 16 V. Low current consumption ( 2 mA ) Side view plastic package with lens Angle of half sensitivity = 35 TTL and CMOS compatible Open collector output Output signal inverted ( active "low" ) Case compatible to CQX48 GaAs IR emitter 96 12156 Applications Optical data interface Optical threshold switch Interrupter Counter Pulse former Absolute Maximum Ratings Tamb = 25_C Parameter Supply Voltage Output Current Power Dissipation Junction Temperature Operating Temperature Range Storage Temperature Range Soldering Temperature Test Conditions Symbol VS1 Io PV Tj Tamb Tstg Tsd Value 18 20 100 100 -40...+85 -40...+100 260 Unit V mA mW C C C C t x 5 s, 2 mm from body Document Number 81561 Rev. 2, 20-May-99 www.vishay.de * FaxBack +1-408-970-5600 1 (4) TESS5400 INLINE Vishay Telefunken Basic Characteristics Tamb = 25_C Parameter Supply Voltage Supply Current Irradiance for Threshold "On" Hysteresis Output Voltage High Level Output Current Test Conditions VS1 = 16 V l = 950 nm l = 900 nm VS1 = 5 V IOL = 16 mA, VS1 = 5 V, Ee Eon VS1 = VS2 = 16V, IF = 0 Symbol VS1 IS1 Eeon Eeon Eeoff/Eeon VOL IOH Min 4.5 Typ 2 50 40 80 0.2 Max 16 5 85 70 0.4 1 Unit V mA mW/cm2 mW/cm2 % V mA Switching Characteristics Tamb = 25_C Parameter Rise Time Fall Time Turn-On Time Turn-Off Time Switching Frequency Test Conditions VS1 = VS2 = 5V, RL = 1 kW, Ee = 3*Eeon, l = 950 nm Symbol tr tf ton toff fsw Min Typ 100 20 1.5 3 200 Max Unit ns ns ms ms kHz Typical Characteristics (Tamb = 25_C unless otherwise specified) V S1 = 5 V 0 R G = 50 W tp IR-Diode = 0.01 T tp = 10 ms IF IS1 V S2 = 5 V R L = 1 kW IO VO Channel II Channel I 50 W 96 12153 Oscilloscope RL CL w 1 MW v 20 pF Figure 1. Test circuit www.vishay.de * FaxBack +1-408-970-5600 2 (4) Document Number 81561 Rev. 2, 20-May-99 TESS5400 INLINE Vishay Telefunken 95 10819 IF o Channel I ton 50% toff 90% VO o Channel II tf tr 10% Figure 2. Pulse diagram Dimensions in mm 96 12155 Document Number 81561 Rev. 2, 20-May-99 www.vishay.de * FaxBack +1-408-970-5600 3 (4) TESS5400 INLINE Vishay Telefunken Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances ( ODSs ). The Montreal Protocol ( 1987 ) and its London Amendments ( 1990 ) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2 . Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency ( EPA ) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C ( transitional substances ) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay-Telefunken products for any unintended or unauthorized application, the buyer shall indemnify Vishay-Telefunken against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 ( 0 ) 7131 67 2831, Fax number: 49 ( 0 ) 7131 67 2423 www.vishay.de * FaxBack +1-408-970-5600 4 (4) Document Number 81561 Rev. 2, 20-May-99 |
Price & Availability of TESS5400INLINE
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |